Disc Hanger & Hook Small 50mm for tiles.
Application instructions
- First, clean the plate thoroughly — even if it's new. There may be invisible dirt or grease on the surface, which can reduce adhesion.
- Using your fingers, mix a little water into the glue on the adhesive side of the disc. Gently rub it with your finger to activate the glue, then leave it to rest for 5 to 10 minutes, until the glue becomes nice and tacky.
- Stick the disc onto the back of the plate. Just make sure the hook is in the right position for your plate. Then press down firmly and rub well to make sure no air bubbles are left behind.
Leave everything to dry overnight.
Removing it again?
No worries: the disc comes off completely in warm water and won't damage the backstamp, the glaze, or any other details on your plate.
